Kennametal Inc. (NYSE:KMT) Q1 2024 Earnings Call Transcript

Kennametal Inc. (NYSE:KMT) Q1 2024 Earnings Call Transcript November 1, 2023

Operator: Good morning. I would like to welcome everyone to Kennametal's First Quarter Fiscal 2024 Earnings Conference Call [Operator Instructions]. Please note that this event is being recorded. I would now like to turn the conference over to Michael Pici, Vice President of Investor Relations.

Michael Pici: Thank you, operator. Welcome, everyone and thank you for joining us to review Kennametal's first quarter fiscal 2024 results. This morning, we issued our earnings press release and posted our presentation slides on our Web site. We will be referring to that slide deck during today's call. I'm Michael Pici, Vice President of Investor Relations. Joining me on the call today are Christopher Rossi, President and Chief Executive Officer; Pat Watson, Vice President and Chief Financial Officer; Sanjay Chowbey, Vice President and President Metal Cutting; and Franklin Cardenas, Vice President and President of Infrastructure. After Chris and Pat's prepared remarks, we will open the line for questions. At this time, I'd like to direct your attention to our forward-looking disclosure statement.

A closeup of a CO2 laser cutting through a piece of metal, demonstrating precision motion.

Today's discussion contains comments that constitute forward-looking statements and as such involve a number of assumptions, risks and uncertainties that could cause the company's actual results, performance or achievements to differ materially from those expressed in or implied by such statements. These risk factors and uncertainties are detailed in Kennametal's SEC filings. In addition, we will be discussing non-GAAP financial measures on the call today. Reconciliation to the GAAP financial measures that we believe are most directly comparable can be found at the back of the slide deck and on our Form 8-K on our Web site. And with that, I'll turn the call over to you, Chris.

Christopher Rossi: Thanks, Mike. Good morning, and thank you for joining us. I'll start the call today with a review of the quarter and some end market commentary as well as an example of the industry leading innovation we're bringing to market. Then Pat will cover the quarterly financial results and the fiscal year '24 outlook. Finally, I'll make some summary comments at the end then open the call for questions. Beginning on Slide 3. For the quarter, sales were flat year-over-year with flat organic growth and no meaningful effect from the net of negative workdays and positive foreign currency. Price realization was offset by anticipated seasonal volume declines. At the segment level, Metal Cutting grew 2% organically and infrastructure declined 3%.

On a constant currency basis, EMEA posted 8% growth, driven primarily by aerospace and defense, general engineering and transportation. The Americas declined 3% mainly driven by energy and general engineering. Asia Pacific declined 8% driven by general engineering, transportation and energy, and reflects year-over-year and sequential declines in China. By end market, Aerospace and Defense reported 17% growth, Energy declined 12%, general engineering declined 1%, transportation declined 1% and Earthworks was flat. This performance was largely as expected with declines in General Engineering, Oil and Gas and in the latter part of the quarter, China. Sequentially, as expected, Q1 sales declined 10%, which is below our historical average of approximately 8%, but generally in line [Technical Difficulty].

Now let me take a moment to provide some color on the end market conditions that led to the year-over-year decline in sales. In Aerospace and Defense, we once again reported strong year-over-year growth of 17%. Metal Cutting benefited from continued execution of our growth initiatives and continued strength in Aerospace, and infrastructure growth was driven by defense order timing. General Engineering declined 1% versus prior year with Metal Cutting growth in the Americas and EMEA, offset by declines in infrastructure. Asia-Pacific declined in both segments due to China. Transportation declined 1% this quarter with a decline in Asia-Pacific due to lower demand in China and a slight decline in the Americas, partially offset by strong EMEA performance, which was driven by continued supply chain easing and new EV project wins, further improving our position in the hybrid and electric vehicle market.

Our transportation results this quarter were not affected by the labor dispute between UAW and the big three US automakers. Energy declined 12%, driven by the lower year-over-year US land based rig counts and continued customer inventory adjustments, and Earthworks was flat during the quarter. Turning now to profitability. As mentioned earlier, price was offset by volume and product mix, and the pricing actions taken in both business segments substantially covered all forms of inflation on a dollar basis. Metal Cutting’s adjusted operating margins increased 170 basis points year-over-year, driven by improved price realization, operational excellence productivity initiatives, and restructuring savings. As anticipated, infrastructure's operating margins were a headwind in the quarter.

The year-over-year operating margin decline was driven by unfavorable price raw material cost timing and product mix, offset by restructuring benefits and operational excellence productivity improvements. Adjusted EPS increased to $0.41 compared to $0.34 in the prior year quarter. Cash from operating activities increased significantly to $26 million from negative $11 million in the prior year quarter, driven mainly by lower inventory levels. And finally, we continued to repurchase shares this quarter with $14 million of shares bought back, bringing the total amount of repurchased since the beginning of the program to $148 million. Our share repurchase program reflects the confidence we have in executing our strategic initiatives for long term value creation despite quarterly macroeconomic headwinds and uncertainties.

Turning to Slide 4, I want to take a moment to provide some additional commentary on our end markets for the full year. As we talked about on our last call, there were several drivers for our expected second half growth acceleration. And despite continued uncertainty, these drivers remain intact. Overall, US land based rig counts are still forecasted to increase slightly during the second half of the year. In addition, public commentary from oilfield service customers indicate that they expect their North American revenues to grow in calendar year '24. General Engineering is expected to improve in the second half of fiscal year '24 as ISI's EMEA IPI forecast indicates gradual improvement starting in calendar year '24. And in the US, according to the National Association of Manufacturers survey, manufacturing production is expected to grow 2% through September of 2024.

Additionally, we're also encouraged by the latest S&P Global Flash U.S. PMI data, which shows an improvement from 47 in August to 50 in October. Earthworks is anticipated to improve during the second half of the year in line with normal seasonality, and we continue to make progress on our growth initiatives to expand into underserved applications. For example, I want to highlight a win in infrastructure that demonstrates our focus on gaining share in underserved mining applications, which we discussed at our last Investor Day. Recently, the team secured an order for our KenCast wear protection solution, which typically is applied to coal mining applications to reduce maintenance downtime. This particular win, however, was for a gold mining were in Brazil.

This demonstrates our ability to leverage our existing solution portfolio to expand into new applications. In transportation per HIS light vehicle production is projected to grow globally low single digits in the second half of fiscal year '24, and we anticipate aerospace and defense to continue its strong performance in both segments during the second half. Aircraft build rates still remain below pre-pandemic levels and major OEMs are continuing to project second half build rates to increase over the first half of our fiscal year. And our strategic focus continues in this end market to drive share gain. As it relates to China, we're optimistic that we'll experience improvement as the PMI indices are approaching 50. So that's a bottom up view of the drivers for an improving end market environment in the second half.

We know of course that there are an increasing number of risk factors that could affect our end markets. And as always, we'll be monitoring the end market conditions and we'll adjust if conditions defer from our expectations. Now on Slide 5, I'd like to highlight an example of our innovation advantage. This slide shows our latest HARVI IV end mill for metal cutting. Notably, this end mill is used in applications with difficult to machine materials, such as titanium, high temperature alloys and stainless steel. These applications cross all end markets, including engine and suspension parts in aerospace and surgical cutting guides for use in medical applications. The value proposition for customers is lower cost of ownership, including 400% longer tool life and 40% higher metal removal rates.

Now let me turn the call over to Pat, who'll review the first quarter financial performance and the outlook.

Pat Watson: Thank you, Chris, and good morning, everyone. I will begin on Slide 6 with a review of Q1 operating results. The quarter's results show that we continue to execute our initiatives in the face of challenging market conditions. Sales were flat year-over-year with flat organic growth and no meaningful effect from workdays or foreign exchange. As Chris pointed out, we performed as expected in our outlook, but for the lack of recovery in China. The decline in China pressured both segments but had a much larger effect on Metal Cutting and sales in several end markets in the Asia-Pacific region. Once again, price remains key strategic lever as we price for value and offset cost inflation. From a sales perspective, the favorable price mitigated the lower volumes we experienced this quarter.

Operating expense as a percentage of sales increased 80 basis points year-over-year to 22.7% as a result of wage inflation and the effects of foreign exchange, partially offset by our savings from our restructuring program. Adjusted EBITDA and operating margins were 16.6% and 9.9% respectively versus 15.9% and 9.8% in the prior year quarter. As in prior quarters, higher pricing offset higher raw material, wage and general inflation in the quarter on a dollar basis. Additionally, during the quarter we realized approximately $4 million in savings from the restructuring program we started in June, and we remain on pace to achieve our stated run rate savings of $20 million annually by the end of FY24. Our results this quarter include a $5 million head from pricing ahead of raw material costs in the prior year.

The adjusted effective tax rate decreased year-over-year to 21%, primarily due to a benefit of approximately $6 million from a onetime tax item, which was expected, partially offset by a settlement related to tax litigation in Italy of approximately $3 million. Adjusted earnings per share were $0.41 in the quarter versus EPS of $0.34 in the prior year period. The main drivers of our EPS performance are highlighted on the bridge on Slide 7. The year-over-year effect of operations this quarter was neutral. This reflects price, operational excellence initiatives and restructuring savings offsetting lower volumes, higher raw material costs and wage and general inflation headwinds. You can also clearly see the effects of the lower tax rate, which reflects the onetime benefit and the Italian tax settlement of $0.05 in total.

Foreign exchange and a lower share count contributed $0.01 each. There was no material change in pension income compared to last, and our US pension plan remains overfunded. Slides 8 and 9 detail the performance of our segments this quarter. Reported Metal Cutting sales were up compared to the prior year quarter with 2% organic growth and a favorable foreign exchange effect of 1%. This marks the 4th consecutive quarter where we have demonstrated growth that outperformed the market when compared to select peers on a constant currency basis. We achieved growth in EMEA and the Americas with Asia-Pacific declining due to China. The Transportation and Energy end markets’ performance on a constant currency basis was also the result of the slowdown in China.

By region, EMEA led at 8%, followed by the Americas of 3%, while Asia-Pacific was negative 13%. EMEA's year-over-year performance reflects growth driven by General Engineering and OEM supply chain improvements and EV wins in transportation. Americas year-over-year growth this quarter was driven by the execution of our growth initiatives in aerospace and defense and the general engineering end market. Asia-Pacific's decline, as Chris noted, was primarily from market conditions in China including lower auto build rates. Looking at sales by end market, aerospace and defense grew 7% as our strategic initiatives continued to drive results in this end market. General Engineering grew 1% with the strongest growth in EMEA and the Americas, partially offset by market softness in China.

Energy declined 3% this quarter driven by the Asia-Pacific region due to lower activity in wind energy. And lastly, transportation declined 1% year-over-year with improving customer supply chains in EMEA more than offset by weaker conditions in Asia-Pacific. As Chris noted earlier, we did not experience any effect this quarter from the UAW strike. Metal Cutting took a meaningful step forward profitability this quarter while operating in a weak volume environment with adjusted operating margin increasing 170 basis points year-over-year. Adjusted operating margin improvement was due to higher price realization, operational efficiencies and restructuring savings. These factors are partially offset by higher wages, general inflation and lower sales volumes.

Turning to Slide 9 for infrastructure. Reported infrastructure sales were down year-over-year due to an organic sales decline of 3% with foreign exchange headwinds and unfavorable business days contributing negative 1% each. Regionally, EMEA grew 11%, Asia-Pacific was flat and America sales declined by 10%. Looking at the sales by end market, on a constant currency basis, energy declined 17%, mainly in Americas due to lower US land rig counts and destocking of inventory at our customers. We expect this to continue into the second quarter. But as Chris noted earlier, customer feedback is indicating a recovery in the second half of our fiscal year. General Engineering declined 8% due to softer market conditions across all regions, and Earthworks was flat with underground mining growth offset by lower construction volume in the Americas.

Lastly, aerospace and defense increased 67% due to defense order timing when compared to the prior year. Adjusted operating margin declined year-over-year to 8%, primarily from two factors. First, lower sales volume, primarily in the energy and general engineering end markets in the Americas. The second significant factor affecting the margin this quarter was higher raw material costs compared to the prior year, which benefited from price raw material cost capability that did not repeat, in addition to higher wages and general inflation. These headwinds were partially offset by operational excellence initiatives. Now turning to Slide 10 to review our free operating cash flow and balance sheet. Our first quarter cash from operating activities was $26 million, up from negative $11 million in the prior year.

Our free operating cash flow increased to negative $3 million from negative $40 million in the prior year quarter, a significant improvement year-over-year. Primary working capital this quarter was flat to the prior year. The company continues to focus on optimizing inventory levels and remains focused on driving improved working capital. On a percentage of sales basis, primary working capital increased to 32.7%. Net capital expenditures were flat at $29 million compared to the prior year quarter. In total, we returned $30 million to shareholders through our share repurchase and dividend programs. We repurchased $14 million of shares in Q1 for a total of $148 million or 5 million shares, representing approximately 7% of outstanding shares since the inception of the program.

And as we have every quarter since becoming a public company over 50 years ago, we paid a dividend to our shareholders. Our commitment to returning cash to shareholders reflects our confidence and our ability to execute our strategy to drive growth and margin improvement. We continue to maintain a healthy balance sheet and debt maturity profile. At quarter end, we had combined cash and revolver availability of approximately $772 million and we’re well within our financial covenants. The full balance sheet can be found on Slide 17 in the appendix. Turning to Slide 11 regarding the second quarter outlook. We expect Q2 sales to be between $490 million and $515 million with volume ranging from negative 5% to flat. Price realization of approximately 3% and we expect foreign exchange to be about a 1% tailwind.

Let me share some detail on the sales assumptions and trends in the Q2 outlook. Our Q2 range at the midpoint reflects growth that is generally in line with our historical norms. On a year-over-year basis, Aerospace and Defense growth continues, Energy declines due to inventory destocking continuing, General Engineering declined slightly but will remain at a similar level to Q1. Transportation increases, however, generally flat with Q1, as we monitor the lingering UAW FX in North America, Earthwork experience is modest growth, and we anticipate a slight improvement in China. Encouragingly, in China, we began to see order intake improving late in Q1. We expect the sequential price raw material headwind of approximately $13 million compared to Q1.

This headwind will primarily affect Infrastructure and to slightly more than the previous estimate due to some favorability timing experienced in Q1. Foreign exchange is expected to be neutral on an operating income basis. We expect adjusted EPS in the range of $0.20 to $0.30. Turning to Slide 12 regarding the full year outlook. For the full year, we are maintaining our outlook as we continue to expect growth to accelerate as the year progresses with the second half outpacing the first half. We continue to expect FY '24 sales to be between $2.1 billion and $2.2 billion with volume ranging from negative 2% to positive 3%, net price realization of approximately 3% with our inflationary pricing actions, partially offset by lower prices for customers with index pricing.

Aerospace and Defense volume remains strong. Earthworks and Transportation increased slightly and we anticipate General Engineering and Energy to be flat. From a cost perspective, we expect the current inflationary environment to persist but it is assumed to moderate. We expect to offset raw material, wage and general cost increases on a dollar basis. Assuming the pricing level for tungsten remains constant in the second half of fiscal '24, we will begin to see a benefit from lower material costs in the fourth quarter. This will largely affect our Infrastructure segment. Foreign exchange and noncash pension income is expected to be neutral on an operating income basis. Approximately $15 million of savings from our previously announced restructuring initiative has been included.

We remain on target to achieve an annualized run rate of approximately $20 million at the end of FY24, and we expect interest expense of approximately $28 million, an effective tax rate of approximately 24% for the full year. We expect adjusted EPS in the range of $1.75 to $2.15. On the cash side, the full year outlook for capital expenditures is $100 million to $110 million and the outlook for primary working capital is between 30% and 32%. Taken together, we continue to expect free operating cash flow at approximately 100% of adjusted net income, in line with our long term target. And with that, I'll turn the call back over to Chris.

Christopher Rossi: Thank you, Pat. Turning to Slide 13, let me take a few minutes to summarize. Overall, although the operating environment continues to be challenging, we remain focused on executing our strategic initiatives to drive long term value. For example, Metal Cutting delivered a fourth consecutive quarter of above market growth, when compared to select peers. Also, our operational excellence initiatives contributed to driving improved margins in Metal Cutting despite lower volumes, and in Infrastructure to mitigate the market-driven volume declines we experienced. These results give us confidence in our ability to drive above market growth through our innovation advantage and commercial excellence initiatives and to extract even greater operational efficiency from our modernized plants as part of the $100 million cost out margin expansion plan we discussed at Investor Day. And with that, operator, please open the line for questions.

See also 30 Most Interesting Cities in America and 30 Most Fertile Countries in the World Heading into 2024.

To continue reading the Q&A session, please click here.