Singapore Markets open in 4 hrs 29 mins

West Joe Dyke Drilling Intersects 1.87% Li2O and 518.19 ppm Ta Over 14.30 m

VANCOUVER , Nov. 13, 2018 /CNW/ - Power Metals Corp. ("Power Metals Corp." or the "Company") (TSX VENTURE:PWM)(OAA1.F)(PWRMF) is pleased to announce that drilling on the recently discovered West Joe Dyke has intersected additional high-grade Lithium (Li) and Tantalum (Ta) mineralization (Table 1):

  • 1.75 % Li2O and 385.38 ppm Ta over 10.91 m , PWM-18-123
  • 0.72 % Li2O and 126.43 ppm Ta over 20.43 m , PWM-18-123
  • followed by 2.92 m of tonalite
Figure 1 PWM-18-124, Boxes 1 to 3, 0.33 – 12.53 m. Note abundant green spodumene. Pink pollucite is above the 11 m wooden tag. (CNW Group/POWER METALS CORP)


This is a total of 31.34 m of high-grade Li and Ta mineralization in longitudinal drill hole PWM-18-123.

Drill hole PWM-18-124 had similar excellent results (Figure 1):

  • 1.87 % Li2O and 518.19 ppm Ta over 14.30 m
  • 1.45 % Li2O and 481.38 ppm Ta over 17.00 m


Also, for a total of 31.30 of high-grade Li and Ta mineralization in this longitudinal hole.

Power Metals drilled holes PWM-18-123 and 124 parallel to the West Joe Dyke to confirm the down dip continuity.

These two holes intersected exceptionally high-grade lithium intervals:

  • 3.88 % Li2O and 232.0 ppm Ta over 0.82 m , PWM-18-124
  • 3.20 % Li2O and 468.93 ppm Ta over 2.10 m , PWM-18-123
  • 2.85 % Li2O and 207.0 ppm Ta over 0.30 m , PWM-18-123


These two holes also intersected exceptionally high-grade Ta intervals:

  • 3783.0 ppm Ta and 2.53 % Li2O over 1.0 m , PWM-18-124
  • 902.26 ppm Ta and 2.59 % Li2O over 5.16 m , PWM-18-124
  • 651.0 ppm Ta and 2.17 % Li2O over 1.0 m , PWM-18-123


Generally, 200 ppm Ta is considered to be ore grade for Tantalum mineralization.

In addition to Lithium and Tantalum mineralization, West Joe Dyke also contains Cesium (Cs) mineralization consistently in multiple holes along strike as shown by the presence of pollucite in drill core (Figure 1) and exceptionally high grade Cs intervals (Table 2):

  • 14.70 % Cs2O over 1.0 m , PWM-18-126
  • 12.40 % Cs2O over 1.0 m , PWM-18-112
  • 6.74 % Cs2O over 5.0 m , PWM-18-126


Pollucite is rare in pegmatites in Ontario , as it has only been identified in five pegmatite localities in the province: Power Metals owned Case Lake, Tot Lake and Marko's pegmatites and two other localities. Pollucite indicates extreme fractionation of the pegmatitic melt and suggests that the West Joe Dyke is more fractionated than the Main Dyke at Case Lake. The presence of pollucite in drill core is spatially associated with high grade Lithium and Tantalum mineralization and should indicate very low iron contents in the spodumene (Figure 1). The presence of pollucite increases the potential to find more spodumene pegmatite dykes with Li, Ta and Cs mineralization near the West Joe Dyke.

Dr. Selway, VP of Exploration, stated "The discovery of West Joe Dyke and the subsequent high-grade Li, Ta and Cs assays in drill core has been the highlight of Power Metals 2018 summer drill program. West Joe Dyke is a three commodity pegmatite and there is potential to find more high-grade Li spodumene pegmatite dykes near it. Also, the 3.0 km area between West Joe, Main and the Northeast Dykes is a large exploration target for potentially more spodumene pegmatites."

Elevated Cs assays and pollucite has been previously identified in drill hole PWM-18-49 in the first new dyke below Main Dyke:

  • 2.00 % Cs2O over 2.0 m interval, from 32.45 to 34.45 m


Elevated Cs assays has also been identified in drill hole PWM-18-71 in the Northeast Dyke:

  • 2.52 % Cs2O over 1.0 m interval, from 25.0 to 26.0 m


Table 1. West Joe Dyke drill hole assays for drill holes PWM-18-118 to 127.








Drill hole No.

Including

From
(m)

To
(m)

Length
(m)

Li2O (%)

Ta
(ppm)

PWM-18-118


59.24

61.00

1.76

0.84

101.32

PWM-18-120


34.97

36.23

1.26

0.66

724.00

PWM-18-120


45.84

46.17

0.33

0.75

378.00

PWM-18-121


19.36

21.46

2.10

1.43

236.50

PWM-18-121


24.12

27.12

3.00

1.30

212.54

PWM-18-122


9.02

9.96

0.94

0.78

456.00

PWM-18-123


0.07

20.50

20.43

0.72

126.43

PWM-18-123

including

6.00

7.00

1.00

1.46

147.00

PWM-18-123

including

17.00

18.00

1.00

1.54

220.00

PWM-18-123

including

19.00

19.69

0.69

1.42

106.00

PWM-18-123

including

20.20

20.50

0.30

2.85

207.00

PWM-18-123


23.42

34.33

10.91

1.75

385.38

PWM-18-123

including

23.42

29.70

6.28

2.55

438.31

PWM-18-123

including

26.60

28.70

2.10

3.20

468.93

PWM-18-123

including

28.70

29.70

1.00

2.17

651.00

PWM-18-124


1.00

18.00

17.00

1.45

481.38

PWM-18-124

including

2.00

4.00

2.00

2.61

205.00

PWM-18-124

including

8.00

11.00

3.00

1.99

1593.67

PWM-18-124

including

8.00

9.00

1.00

2.53

3783.00

PWM-18-124

including

15.00

17.00

2.00

2.01

417.50

PWM-18-124


37.50

51.80

14.30

1.87

518.19

PWM-18-124

including

37.50

38.57

1.07

2.46

430.00

PWM-18-124

including

42.18

43.00

0.82

3.88

232.00

PWM-18-124

including

45.84

47.00

1.16

2.55

1004.00

PWM-18-124

including

45.84

51.00

5.16

2.59

902.26

PWM-18-125


9.12

11.00

1.88

2.05

153.89

PWM-18-126


9.38

17.00

7.62

1.62

260.40

PWM-18-126

including

11.00

13.00

2.00

2.37

102.85

PWM-18-126

including

16.00

17.00

1.00

1.76

653.00

PWM-18-127


6.19

6.91

0.72

1.60

101.00








PWM-18-119 has no significant Li values.

 

Table 2 West Joe Dyke Cs2O % assays for drill holes PWM-18-111 to 127.


Drill Hole No.

Including

From
(m)

To
(m)

Length
(m)

Cs2O
(%)

PWM-18-111


12.00

13.20

1.20

2.36

PWM-18-112


10.00

11.00

1.00

12.40

PWM-18-116


43.68

44.68

1.00

1.43

PWM-18-116


46.68

47.68

1.00

2.31

PWM-18-116


48.64

50.10

1.46

2.61

PWM-18-123


15.00

18.00

3.00

1.49

PWM-18-123


27.66

29.70

2.04

4.54

PWM-18-123

including

27.66

28.70

1.04

5.86

PWM-18-124


9.00

11.00

2.00

3.92

PWM-18-124

including

9.00

10.00

1.00

5.74

PWM-18-124


12.00

14.00

2.00

4.88

PWM-18-124


38.57

39.15

0.58

1.18

PWM-18-124


41.50

42.18

0.68

5.14

PWM-18-126


11.00

16.00

5.00

6.74

PWM-18-126

including

13.00

14.00

1.00

14.70







 

Figure 1 PWM-18-124, Boxes 1 to 3, 0.33 – 12.53 m . Note abundant green spodumene. Pink pollucite is above the 11 m wooden tag.

Drill hole collar locations are given in Table 3 and are plotted in Figures 2 and 3. Drill holes intersect the pegmatite dyke at approximately 90° except for longitudinal holes PWM-18-122, 123 and 124, thus intersected mineralized widths are close to true widths for all holes except for these three.

West Joe spodumene pegmatite is located 1.6 km southwest of the western edge of the Main Dyke and 3.0 km southwest of the Northeast Dyke (Figure 2). West Joe, Main and Northeast Dykes occur along a SW-NE trend (Figure 2). As the spodumene mineralization is the same in all three dykes and the dykes are along the same trend, the 3.0 km area between West Joe, Main and the Northeast Dykes is a large exploration target for potentially more spodumene pegmatites.

Figure 2 Case Lake Property showing the location of West Joe Dyke, Main Dyke, East and Northeast Dyke drilling.

Figure 3 Location of drill hole collars for West Joe Dyke drill program, Case Lake Property.

Table 3 Drill hole collar locations on West Joe Dyke, Case Lake Property. UTM NAD 83, Zone 17. DGPS survey.

Drill Hole No.

Easting
(m)

Northing
(m)

Elevation
(m)

Azimuth
(°)

Dip
(°)

Length
(m)

PWM-18-118

576285.84

5431164.38

340.17

170

-45

86.49

PWM-18-119

576276.05

5431139.35

342.7

168

-45

79.47

PWM-18-120

576329.53

5431147.35

341.79

170

-45

80.34

PWM-18-121

576338.30

5431120.25

347.35

170

-45

89.18

PWM-18-122

576288.74

5431089.04

347.45

38

-60

91.34

PWM-18-123

576310.96

5431095.86

345.65

58

-45

95

PWM-18-124

576295.53

5431096.45

347.07

36

-60

95

PWM-18-125

576286.48

5431107.81

345.94

170

-45

32

PWM-18-126

576306.69

5431109.73

345.74

170

-45

32

PWM-18-127

576337.02

5431102.73

344.92

170

-45

20








 

Quality Control

The drill core was sampled so that 1 m of the Case Batholith tonalite host rock was sampled followed by 1 m long samples of the pegmatite dyke and 1 m of the Case Batholith. The sampling followed lithology boundaries so that only one lithology unit is within a sample, except for the < 20 cm pegmatite veins in tonalite which were merged into one sample. The drill core samples were delivered to SGS preparation lab in Cochrane by Power Metals' geologists. The core was then shipped to SGS analytical lab in Lakefield, Ontario which has ISO 17025 certification. Every 20 samples included one external quartz blank, one external lithium standard and one core duplicate. The ore grade Li2O% was prepared by sodium peroxide fusion with analysis by ICP-OES with a detection limit of 0.002 % Li2O. A QA/QC review of the standards and blanks for this drill program indicate that they passed and the drill core assays are accurate and not contaminated.

Case Lake

Case Lake Property is located in Steele and Case townships, 80 km east of Cochrane , NE Ontario close to the Ontario - Quebec border. The Case Lake pegmatite swarm consists of six spodumene dykes: North, Main, South, East and Northeast Dykes on the Henry Dome and the West Joe Dyke on a new tonalite dome. Power Metals has an 80% interest with its 20% working interest partner MGX Minerals Inc.

Qualified Person

Julie Selway , Ph.D., P.Geo. supervised the preparation of the scientific and technical disclosure in this news release. Dr. Selway is the VP of Exploration for Power Metals and the Qualified Person ("QP") as defined by National Instrument 43-101. Dr. Selway is supervising the exploration program at Case Lake. Dr. Selway completed a Ph.D. on granitic pegmatites in 1999 and worked for 3 years as a pegmatite geoscientist for the Ontario Geological Survey. Dr. Selway also has twenty-three scientific journal articles on pegmatites. A National Instrument 43-101 report has been prepared on Case Lake Property and filed on July 18, 2017 .

About Power Metals Corp.

Power Metals Corp. is a diversified Canadian mining company with a mandate to explore, develop and acquire high quality mining projects.  We are committed to building an arsenal of projects in both lithium and high-growth specialty metals and minerals. We see an unprecedented opportunity to supply the tremendous growth of the lithium battery and clean-technology industries.  Learn more at www.powermetalscorp.com

ON BEHALF OF THE BOARD,

Johnathan More , Chairman & Director

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the content of this news release.

No securities regulatory authority has either approved or disapproved of the contents of this news release. The securities being offered have not been, and will not be, registered under the United States Securities Act of 1933, as amended (the "U.S. Securities Act"), or any state securities laws, and may not be offered or sold in the United States , or to, or for the account or benefit of, a "U.S. person" (as defined in Regulation S of the U.S. Securities Act) unless pursuant to an exemption therefrom. This press release is for information purposes only and does not constitute an offer to sell or a solicitation of an offer to buy any securities of the Company in any jurisdiction.

Cautionary Note Regarding Forward-Looking Information

This press release contains forward-looking information based on current expectations, including the use of funds raised under the Offering.  These statements should not be read as guarantees of future performance or results. Such statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to be materially different from those implied by such statements. Although such statements are based on management's reasonable assumptions, Power Metals assumes no responsibility to update or revise forward-looking information to reflect new events or circumstances unless required by law.

Although the Company believes that the expectations and assumptions on which the forward-looking statements are based are reasonable, undue reliance should not be placed on the forward-looking statements because the Company can give no assurance that they will prove to be correct. Since forward-looking statements address future events and conditions, by their very nature they involve inherent risks and uncertainties. These statements speak only as of the date of this press release. Actual results could differ materially from those currently anticipated due to several factors and risks including various risk factors discussed in the Company's disclosure documents which can be found under the Company's profile on www.sedar.com.

This press release contains "forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E the Securities Exchange Act of 1934, as amended and such forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. The TSXV has neither reviewed nor approved the contents of this press release.

Figure 2 Case Lake Property showing the location of West Joe Dyke, Main Dyke, East and Northeast Dyke drilling. (CNW Group/POWER METALS CORP)
Figure 3 Location of drill hole collars for West Joe Dyke drill program, Case Lake Property. (CNW Group/POWER METALS CORP)
POWER METALS CORP (CNW Group/POWER METALS CORP)

SOURCE POWER METALS CORP


View original content to download multimedia: http://www.newswire.ca/en/releases/archive/November2018/13/c6908.html