Yahoo Finance Renovation Costs in Singapore – How Much Should You Budget?
The most expensive thing you can buy in Singapore is probably your home. Given that kind of investment, we can appreciate why you’d want to make your home as good looking as possible. But, oh boy, doing a home renovation in Singapore is going to cost you an arm and a leg.
To help you see how much you need to spend, where all the money goes, and how you can keep the budget low, here’s our guide to renovating costs in Singapore.
Contents
Renovation contractor, ID or design & build: Who should you hire?
Financing your renovation: What are your renovation loan options?
How much does a home renovation in Singapore cost?
Obviously, you need a ballpark figure to know how much you should set aside. But the question is a tough one to answer, because there are so many variables. The ultimate cost of renovation depends on:
Type of home: Is it an HDB flat, condo, or landed house? Does it already come with any existing fittings?
Its age & condition: The extent and type of renovation work for a brand new BTO and a decades-old resale flat will be very different.
How much work you want done: Are you more or less happy with the current state of affairs, or do you want to hack everything and build your dream home from a blank canvas?
Type of materials: If you have a taste for atas marble countertops and parquet flooring, expect to pay more.
The contractor/ID firm you choose: Different companies charge differently, of course.
Renovation costs for a 4-room HDB flat (approx. 90 sq m) can cost anything from $5,000 to over $100,000, depending on all the factors above.
According to renovation portal Qanvast, the average 4-room HDB BTO flat renovation is estimated to cost about $7,400 to $71,370, ranging from basic kitchen carpentry for a new BTO to a full-on extensive makeover for a resale HDB.
But these numbers only the starting point. They don’t mean anything unless you have a better idea of what you want.
Renovation budget estimates for a 4-room HDB flat
Here’s a look at estimated renovation costs for a 4-room HDB flat’s living and dining space, taken from Qanvast’s excellent renovation calculator.
Though the living and dining rooms (or combined living & dining space, if we’re talking about most HDB flats) constitute a large part of the flat, renovation costs here can actually be pretty low.
Renovation component | Light | Moderate | Extensive |
Hacking | $100 to $300 | $300 to $700 | $700 to $3,800 |
Masonry | $100 to $1,200 | $1,200 to $2,900 | $2,900 to $21,900 |
Carpentry | $100 to $3,400 | $3,400 to $6,200 | $6,200 to $23,600 |
Ceiling & partition | $100 to $700 | $700 to $1,200 | $1,200 to $3,200 |
Expected costs for bedrooms (price is per room):
Renovation component | Light | Moderate | Extensive |
Hacking | $100 to $300 | $300 to $700 | $700 to $3,800 |
Masonry | $100 to $1,200 | $1,200 to $2,900 | $2,900 to $21,900 |
Carpentry | $100 to $3,400 | $3,400 to $6,200 | $6,200 to $23,600 |
Ceiling & partition | $100 to $700 | $700 to $1,200 | $1,200 to $3,200 |
On to kitchen renovations. This space may seem purely functional, but there’s actually a lot going on in there, which means renovation costs can actually be quite high considering its small size.
Renovation component | Light | Moderate | Extensive |
Hacking | $100 to $400 | $400 to $900 | $900 to $3,100 |
Masonry | $100 to $1,300 | $1,300 to $3,800 | $3,800 to $11,200 |
Carpentry | $100 to $4,200 | $4,200 to $6,800 | $6,800 to $17,800 |
Plumbing | $100 to $200 | $200 to $400 | $400 to $1,700 |
Same goes for bathrooms (price is per bathroom).
Renovation component | Light | Moderate | Extensive |
Hacking | $100 to $400 | $400 to $900 | $900 to $6,700 |
Masonry | $100 to $1,400 | $1,400 to $5,600 | $5,600 to $17,400 |
Carpentry | $100 to $1,100 | $1,100 to $2,000 | $2,000 to $8,900 |
Plumbing | $100 to $200 | $200 to $700 | $700 to $3,800 |
Don’t forget to budget for these added overall costs in your renovation:
Renovation component | Light | Moderate | Extensive |
Electrical wiring | $200 to $1,900 | $1,900 to $3,100 | $3,100 to $16,000 |
Painting | $200 to $1,500 | $1,500 to $1,800 | $1,800 to $8,000 |
Glass & Aluminium | $200 to $2,100 | $2,100 to $4,700 | $4,700 to $15,700 |
Disposal & cleanup | $200 to $1,100 | $1,100 to $1,800 | $1,800 to $13,800 |
What do hacking, masonry, carpentry, etc. mean?
Before you embark on any renovation work, you should understand what kind of work you’ll be paying for.
While items like plumbing, electrical wiring and painting are pretty self-explanatory, hacking, masonry and carpentry are the 3 biggies that will constitute the bulk of the work (and the cost).
Hacking: Refers to the removal of any existing built-in furniture, flooring, wall finishes (e.g. tiles) as well as actual walls or other structures.
The more you mess with the original state of the home, the more work it entails and the more it will cost you – demolition and disposal are both a lot of work. That’s why renovations for resale flats can actually cost much more than a “blank canvas” new flat.
In some cases, it’s not really necessary to hack. For example, if you want to update the flooring, many modern vinyl, laminate and engineered wood floors can simply be laid over the existing tiles.
Masonry: Masonry is anything involving cement. Think building shower kerbs, cabinet bases and tiling floors/walls.
The more hacking and reconfiguration you do, the more masonry needs to be done. And the more surface area you cover, the more raw material and labour it requires, so the more expensive it is.
Carpentry: This is anything involving wood, such as custom-building bookcases, TV consoles, bed platforms, wardrobes, kitchen cabinets, and so on.
While custom-built furniture look classy, they’re not really necessary – there are so many affordable furniture options out there; you just need to find the right configuration.
What else affects the cost of your renovation?
We’ve talked about how your renovation bill can inflate along with the extent of hacking, masonry and carpentry needed. Another important factor is the type of finishes/materials you choose for your walls, floors and other surfaces like kitchen countertops.
Wall and floor finishes include plastering, skim coating, painting and tiles. In wet areas like the bathroom and kitchen, waterproofing is needed as well.
What types of flooring and wall tiles you pick can make renovation costs astronomical so they need to be separately factored into your budget. Here’s a list of common flooring materials and how much they cost:
Flooring material | Cost |
Vinyl | $3 to $8 psf |
Laminate | $2 to $8 psf |
Ceramic tiles | $3 to $35 psf (including labour) |
Cement screed (polished) | $15 to $30 psf |
Hardwood (e.g. parquet) | $8 to $100+ psf |
Marble | $10 to $100+ psf |
The kitchen is another place where your costs are affected by the materials you choose. Apart from the cost of the cabinet material (laminate is cheapest, solid wood the priciest) there’s also the cost of the countertop material to consider.
Countertop material | Cost |
Laminate | $8 to $20 per foot run |
Solid surface | $55 to $175 per foot run |
Wood | $20 to $150 per foot run |
Ceramic tiles | $30 to $80 per foot run |
Granite | $55 to $175 per foot run |
Stainless steel | $80 to $125 per foot run |
Engineered quartz | $90 to $105 per foot run |
Let’s use an example A four-room apartment, they want to knock down a wall and spruce up the overall decor, whilst maintaining an industrial look Hacking a wall $ 4,000 Masonry $ 10,000 Floor finishing $ 4,000 Carpentry $ 15,000 Windows and grills $ 6,000 Electrical and lighting fixtures $ 2,000 Total Expenditures All this excludes furnishing their home – Wall to hack $ 41,000 Rachel and Billy are renovating their new home Their budget is $ 30,000 Oh no, they’ve gone They now have 2 choices Drop the wall hacking Debt is bad. Very bad. OR Go further into debt by not compromising over budget!
Back to top
HDB renovation rules: What can & can’t be done?
As we all know, HDB has a lot of rules and regulations for public housing. Here are some rules to bear in mind when you plan your renovation.
Submit all plans to HDB for approval before hacking: Some walls, columns, beams and slabs are load-bearing and cannot be removed, moved or altered. (On your floor plan, these are usually shaded in solid black or grey.)
Other walls, though not load-bearing, hide important wiring and piping and cannot be tampered with. To play it safe, make sure to submit all plans to HDB for approval before any hacking begins.
Pre-packed cement screed: HDB now makes it compulsory to use pre-packed cement screed on dry areas (i.e. walls and floors of bedrooms and living room). This gives a more uniform finish, but also costs more than regular cement.
BTO bathroom floor & walls cannot be changed for 3 years: There’s a 3-year restriction period on renovation work on the floors and walls of your new BTO bathroom.
That’s because they are coated with a waterproof membrane to prevent water from seeping to the unit below. If you choose to disregard the restriction and there’s seepage, you have to bear the cost of fixing the damage to your neighbour’s home.
(You can, however, tile over the existing flooring or lay a slip-resistant laminate.)
Exposed pipes cannot be permanently concealed: You feel the urge to cover up the exposed pipes in your bathroom or kitchen. As much of an eyesore as they are, pipes cannot be permanently concealed. In case of clogs, HDB must be able to access the pipes to investigate.
Restrictions on household (bomb) shelter: They aren’t the prettiest and you’ll be tempted to do something about them. But here’s what you CAN’T do to the shelter:
Cover or remove the notice pasted on the door
Modify or remove the door
Lay tiles, spray wall finishing such as cement sand finishing or put wall plaster on the interior walls
Lay tiles or skirting over its existing floor tiles
Hack on the external walls of the shelter to mount panels or lay tiles
Install anything that requires power tools on the interior walls
Front door needs to be fire-rated: If you want to replace your front door, you can, but just make sure the new door is fire-rated. Most HDB front doors are designed to contain smoke and fire within the unit so they don’t spread to staircases or life lobbies.
Restrictions on changing the windows & grilles: You absolutely cannot remove or tamper with the safety railings or grilles installed by HDB. You can replace the windows… but full height, ¾ height and bay windows are all not allowed. For windows facing the common corridor, you cannot install windows that open outwards.
And for balconies with a sliding door, the door is there because windows are not allowed, so don’t even think about touching it.
Renovation timings: Oh, and finally… HDB has something to say about the timing of your renovation, too. No matter how quiet, you cannot do renovation work:
Before 9am and after 5pm on weekdays and Saturdays
On Sundays and public holidays
For more than 3 months from date of the HDB permit
Noisy renovation works, such as demolition and drilling, are restricted on weekends and public holidays to minimise being a pain in the ass to your neighbours.
Things to note when you renovate You may own your house but HDB still has the final say on these matters Renovation Timings Mon – Fri Heavy 9am – 5pm Mon – Sat Light 9am – 6pm Windows and Grills Cannot change safety railings/grills No full height, ½ height or bay windows Bathroom BTOs – Cannot renovate walls / floors in first 3 years Pipes cannot be permanently concealed Front Door Must be fire-rated Household Shelter Can’t do pretty much anything Flooring Must use pre-packed cement screed Wall Hacking Must submit all plans to HDB for approval before hacking!
Renovation contractor, ID or design & build: Who should you hire?
It’s not enough to know how much to budget for each aspect of renovation work. Another important consideration that impacts cost is which vendor you eventually appoint to handle the renovation itself.
The first decision you have to make is: do you want a contractor, an interior designer or a design-and-build company?
All 3 will handle the actual renovation work (the heavy lifting), so the difference is in what value-added services they provide:
Component | Contractor | Design & build | Interior designer |
Design work | No | Limited | Yes |
Conceptualising | No | Limited | Yes |
Material sourcing | Optional | Yes | Yes |
Project management | No | Yes | Yes |
Renovation contractor: These are the cheapest of the 3, since you’re paying for just the heavy lifting. If you have time and are confident about being in charge, going contractor-only is a good way to manage your budget. Typically they charge based on the cost of construction materials.
Renovation contractors need to be managed and given specific instructions. So this option is suitable for people who know exactly what they want, including the more technical specifications. You probably also need to take time off to stay home and oversee the work.
Interior designer: The interior designer (commonly abbreviated as “ID”) is a person or firm you hire on top of the contractor to help conceptualise, design, source and manage the entire project.
An ID’s job is to advise and create 3D designs that you approve, and to do the legwork when it come to sourcing for furniture, furnishings and fittings to complete the look. ID firms will also coordinate with your contractor and manage the renovation project, so it’s great if you want to be completely hands-off.
Of course the drawback is that you’ll have to pay more. IDs typically charge consultancy fees and fees on top of the materials. Read this article to find out more about the pros, cons and costs of hiring an ID.
Design & build: Somewhere in between is the design & build option. They’ll do the construction work expected of a contractor, but include the design and project management as part of the package. Similar to contractors, you’ll pay a rate that’s based on the cost of the materials. No need to pay consultancy fees as the design is thrown in for free.
However, don’t expect them to turn your 4-room flat into a Banyan Tree resort. Design-and-build companies are more proficient in the construction aspect than the design one.
For practical homeowners who are managing their budget and not willing to splurge on the level of service and design provided by an ID firm, this is a viable option. It’s good for those who know what they want, but don’t have the time to actively manage the renovation project.
What are your options Who are the experts you can work with? Contractors Difficulty: HARD Focusing only on the construction, You’ll have to manage the entire project schedule and design Design & Build Difficulty: MEDIUM Just as it’s name says, but don’t expect a curated design space that’s showroom-worthy Interior Design Firm Difficulty: EASY ID firms offer you everything but be careful of scammers and skyrocketing prices Minimalist or extravagant? Renovation prices range from Renovations run at an average of $ 4,888 – $ 110,000 $ 53,000
How to find a legit renovation contractor in Singapore
Before you rush out and look for a company to engage, beware of renovation scams as there are loads of people waiting to make a quick buck off gullible homeowners. Apart from checking references and not falling for too-good-to-be-true deals, make sure that the company is a legitimate one.
For contractors, HDB has a list of approved vendors, while for IDs you can check if they’re CaseTrust accredited.
If you’re renovating an HDB flat, you can only hire a renovation contractor listed under the Registered Renovation Contractors’ Scheme (RRCS). HDB approved contractors know all of HDB’s rules and requirements and will turn down non-compliant jobs.
By the way, HDB is also pretty strict about other kinds of work that can be done on your flat, from plumbing to window installation. Refer to this site for a list of HDB licensed personnel.
As for interior designers, HDB doesn’t have a list of interior designers as they don’t do any renovation work. This is where many renovation scams happen – the ID firm takes your deposit and disappears.
Protect yourself by engaging only CaseTrust-accredited ID firms. The accreditation scheme requires companies to protect their customer’s deposit payment through the purchase of a deposit performance bond. In case the company folds before the work is done, you don’t lose your deposit.
Companies under this scheme also need to have cost transparency, accountability and good business practices. Policies on fees and refunds, and dispute resolution methods have to be properly documented as well.
Even when you choose only from those with accreditations, the list can still be very long. Thankfully, there are plenty of one-stop platforms you can turn to get recommendations and/or free quotes. (You should still cross-reference against the HDB and CaseTrust lists, however.)
Nobody wants to get scammed off their hard-earned money Look for these seals of approval to ensure they are legit ID firms CaseTrust Contractors RRCS (HDB only) How NOT to Get Scammed Take note Most scams happen with ID firms, so be sure to commission only CaseTrust-accredited firms
Financing your renovation: What are your renovation loan options?
Yeah, you’re probably feeling broke just reading this article. If you don’t have a spare $50,000 to $100,000 lying around to do up your new home, you will most likely have to go for a renovation loan.
Renovation loans are different from personal loans. With a personal loan, you get the money in cash. The bank doesn’t know what you’re going to do with it, so it’s riskier for them. As a result, personal loan interest rates are usually pretty high.
With a renovation loan, however, the money goes straight to your contractor, bypassing you entirely. Because the bank knows exactly what you’re going to do with the money, they can charge much lower interest rates, usually less than 5% p.a. (Plus if you already have an existing loan with the bank, they’re likely to give you a 0.5% to 1% discount on your renovation loan.)
Here are some examples. You can also compare renovation loan packages on MoneySmart.
Per Month
S$369.96
Per Month
OCBC Renovation Loan Monthly Rest
Apply NowApply directly on MoneySmart
More Details
Key Features
Only bank in Singapore to allow third party borrower
Loan disbursed 1 working day after approval
Per Month
S$369.23
Per Month
Best for Larger Renovation Loans
Maybank Renovation Loan Monthly Rest
Apply NowApply directly on MoneySmart
More Details
Key Features
Borrow up to 6x your monthly salary or $30k whichever is lower
Loan tenure of up to 5 years
Attractive interest rates
The drawback is that you can’t cash out your renovation loan for a shopping spree at IKEA or Harvey Norman. So, keep your loan amount as small as possible. You can usually borrow up to 6 times your monthly income, or $30,000, whichever is lower.
For lots more info, read our ultimate guide to renovation loans in Singapore.
Financing your renovation How much can you borrow? You’ve checked all the boxes, balanced your budgets and now you need to take a loan 6 months worth of your monthly income or $30,000 (whichever is lower) Loan tenures generally cap at 5 years
Know someone who needs help budgeting for their renovation? Share this article with them.
The post Renovation Costs in Singapore – How Much Should You Budget? appeared first on the MoneySmart blog.
MoneySmart.sg helps you maximize your money. Like us on Facebook to keep up to date with our latest news and articles.
Compare and shop for the best deals on Loans, Insurance and Credit Cards on our site now!
The post Renovation Costs in Singapore – How Much Should You Budget? appeared first on MoneySmart.sg.
Original article: Renovation Costs in Singapore – How Much Should You Budget?.
© 2009-2018 Catapult Ventures Pte Ltd. All rights reserved.
